Headlight patch harness suits Holden Colorado

AUD$28.00

or 4 fortnightly payments of AUD$7.00 with Afterpay More info

Connector: 10 pin Patch harness

Length: 180mm

Outputs:  Low beam, high beam and negative

  • Blue – Low beam pickup (positive)
  • Green – High beam pickup wire (negative)
  • Red – High beam pickup wire (positive)

Description

This specifically designed headlight patch harness allows for simple and safe integration into the vehicle’s headlight assembly without cutting or splicing into the electrical system.

Provides low beam, high beam and negative pickup points for auxiliary driving lights.

This patch harness is to be combined with the new range of Lightforce wiring harness and OEM style switches for a true plug & play solution, enabling simple DIY installation of auxiliary driving lights and switches possible to a range of Holden Colorado models.

Make Model Year
Holden Colorado 2012 - 2020
Holden Trailblazer 2017 - 2020

Wiring Information

The only compatible Lightforce Harnesses are:

  • Venom and Genesis LED Harness (LFDLHTS/LFDLHTS2)
  • HTX Hybrid Driving Light Harness (LFDLHDS)
  • Striker LED Harness (STRIKERLEDHARN)
  • Universal Driving Light Harness (LFDLHSS) – Available Soon.

All Patch Harnesses With Two Wires (Red/Green)
When used with Lightforce Driving Light Harnesses LFDLHDS, STRIKERLEDHARN and LFDLHSS:

  • Connect the red and green wires from the patch harness to the red and green wires from the Lightforce Driving Light Harness.

When used with Lightforce Driving Light Harnesses LFDLHTS and LFDLHTS2 and you wish to operate the optional positioning light function:

  • Connect the blue wire on the Driving Light Wiring Harness to a 12v low beam power source within the engine bay. Please refer to the Lightforce Driving Light Wiring Harness User Instructions for full details.

Patch Harness Wiring:

  • Red – High beam operation
  • Green – High beam operation.

Note: Both red and green wires MUST be connected.

 

All Patch Harnesses With Three Wires (Red/Green/Blue)
When used with Lightforce Driving Light Harnesses LFDLHTS and LFDLHTS2:
Connect all three corresponding wire colours from the patch harness to the Lightforce Driving Light Wiring Harness.

Patch Harness Wiring:

  • Red – High beam operation
  • Green – High beam operation
  • Blue – For the optional positioning light function (low beam 12v +).

Note: Both red and green wires MUST be connected.

When used with Lightforce Driving Light Harnesses STRIKERLEDHARN, LFDLHSS and
LFDLHDS:

  • Connect the red and green wires from the patch harness to the red and green wires
    from the Lightforce Driving Light Harness.

The remaining blue wire can be used for the switch illumination pickup (yellow wire on
Driving Light Harness). If not required, please insulate and secure. Please refer to the
Lightforce Driving Light Wiring Harness User Instructions for full details.

Note: The above options for functionality and integration is not applicable to Lightforce Driving Light Harness LFDLH or any Lightforce LED Bar Wiring Harness.